Cabinet Doors & Drawer Fronts

Cabinet Doors & Drawer Fronts

It’s the door that makes the difference

How To Order

  1. Select "Cabinet Door" or "Drawer Front"
  2. Select Species
  3. Select Type of Door or Drawer Front
  4. Select Frame and Panel Profile
  5. Determine Hinge Boring details
  6. Select Center Rail & Stiles specifics

ORDERING GUIDE

MATERIAL SPECIFICATIONS

  • SELECT

    Select species are purchased to the highest grade and thoroughly inspected to minimize pin knots and mineral streaks. If they appear, this is not considered a defect.

    • Select Alder Select Alder

      Uniform in color and glued up for a pleasing grain pattern. Flat panel doors will use clear alder plywood.

    • Select Red Oak Select Red Oak

      Occasional pin knots and burls allowed on face and in profiled areas. Will be uniform in color and glued up for a pleasing grain pattern and will be lighter in color than a natural grade. Flat panel doors will use red oak plywood.

    • Select Cherry Select Cherry

      Uniform in color and glued up for a pleasing grain pattern. Small percentage of mineral, sap, and pitch pockets allowed. Occasional pin knots allowed on face and in profiled areas. Will naturally darken when exposed to sun and natural light. This may be enhanced with light and clear finishes and is not considered a defect. Flat panel doors will use cherry plywood.

    • Select Hard Maple Select Hard Maple

      Uniform in color and glued up for a pleasing grain pattern and lighter color. "Spray No Wipe" stain process is recommended. Face side will allow small amount of mineral streaks. Small amount of "flags" also allowed. Flat panel doors will use hard maple plywood.

    • Select Soft Maple Select Soft Maple

      Glued up for a pleasing color and grain pattern. "Spray No Wipe" stain process is recommended. Face side will allow small amounts of mineral streaks. Color variations from white to light gray. Small amount of "flags" also allowed. Flat panel doors will use hard maple plywood.

  • RUSTIC

    Rustic means heart or sap may be present depending on species; mineral streaks, random knots, and/or cluster knots may be present.

    • Rustic “Knotty” Alder Rustic “Knotty” Alder

      Mineral, sap, and knots are common and allowed. Light tan sap to reddish brown heartwoods are blended throughout. Knot size or color cannot be specified by customer. Knots may contain voids but no light will shine through. Flat panel doors will use knotty alder plywood.

  • PAINT GRADE

    Natural materials have some color variation, small and large stave pieces, and some mineral streaks.

    • Natural Poplar Natural Poplar

      Poplar has naturally occurring characteristics such as mineral streaks, sapwood, heartwood, pin knots, or large color variations and all are acceptable.

    • MDF MDF

      MDF can be specified for raised panels or flat panel Paint Grade Doors or Drawer Fronts. The frame material will be poplar.

DOOR TYPES

  • Solid Solid

    Our 5-piece doors feature mitered corners for stronger joints and doors which give a more attractive, elegant look to the cabinet doors and drawer fronts.

  • Overlay or Integrated Appliance Panels Overlay or Integrated Appliance Panels

    Appliance panels, overlay or integrated, are available to complete the kitchen design.  Please refer to the appliance owner's manual to ensure correct dimensions are selected.

  • Fixed Lazy Susan Doors Fixed Lazy Susan Doors

    We offer custom-made lazy susan doors when needed to complete the design. Customers will receive two identically sized mitered corner doors along with a piece of 3/4" inside corner moulding so that the two doors can be attached at a 90-degree angle.

  • Slab Slab

    Slab drawer fronts offer a clean contemporary look in a solid piece of material.  We offer 8 different edge profiles to marry with the cabinet door profile seamlessly.

  • Bar Back/Wainscot made with Mitered Doors Bar Back/Wainscot made with Mitered Doors

    Our bar back/wainscot doors feature a 3/8" inset around the back edge of the door to complete the look as they are placed in the pre-made face frame.

  • Frame Doors Frame Doors

    We offer frame doors for all our profiles.  The frame door will come without the center panel and will be notched to accept a glass pane or any other type of decorative panel.

  • Mullion Doors Mullion Doors

    Mullion doors are manufactured for use with single pane glass.  They are offered in three patterns: 4 lite, 6 lite, and 9 lite.  We offer the mullion door option for our most popular frame styles.

FRAME PROFILES

  • 2-1/2" APPLIED ROPE MOULDING
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile
    3" APPLIED ROPE MOULDING
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile
    2-3/4" APPLIED MOULDING*
    • Door Profile Door Profile

      *Frame heights vary between 1” and 1-1/16” in height

    • Drawer Profile Drawer Profile
    2-1/4" STANDARD PROFILES
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile

    All Door Profiles are 3/4" high unless noted
    All Drawer Profiles are 3/4" high and 1-1/2" wide unless noted
    All Panel Profiles are 5/8" thick unless noted

  • 2-1/2" STANDARD PROFILES
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile
    3" STANDARD PROFILES
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile
    • Door Profile Door Profile
    • Drawer Profile Drawer Profile

PANEL PROFILES

Panel Profiles

SLAB DRAWER PROFILES

Slab Drawer Profiles

MULLION PROFILES

Mullion Profiles

HINGE BORING

Standard tab dimension is 3mm. You can specify tab ranging from 0mm to 6mm, in 1mm increments.

Hinge placement is fixed at 3" from each end of door to center of bore.

An upcharge per bore will be added to the order.

Number of hinges per door is fixed according to the following rules:

  • Doors < or = 39" will have 2 hinges
  • Doors > 39" to 63" will have 3 hinges
  • Doors > 63" to 79" will have 4 hinges
  • Doors > 79" will have 5 hinges

All holes will be drilled with the hinge bore pattern shown.

Mullion Profiles

CENTER STILES & RAILS

Center horizontal rails will be placed on doors over 60" in height. A center horizontal rail will be placed to achieve a 50/50 split unless otherwise specified by customer. Warranty will be void if customer refuses center rail placement on doors over 60" in height. An upcharge will also apply if customer refuses center rail placement on raised panel doors over 60" in height.

If you want spacing other than 50/50, specify on your order which split you need for center rail placement. For example, a 40/60 split means the lower panel is the larger panel and will comprise 60% of the total visual opening space, while the upper panel will comprise 40%.

Center vertical stiles will be placed on doors greater than 25" wide. A center vertical stile will be placed to achieve a 50/50 split. Warranty will be void and an upcharge will apply if center stile is refused on doors greater than 25" wide.

Each additional panel will require a per panel upcharge.

Mullion Profiles

RESOURCES & ASSISTANCE

We've put together this list of commonly viewed resources for your convenience.
Resources for a specific product can be found on the product's detail page.


  • All About Mitered Corner Doors All About Mitered Corner Doors
  • Manufacturing Standards Manufacturing Standards
  • Cabinet Doors and Drawer Fronts Brochure Cabinet Doors and Drawer Fronts Brochure
  • Cabinet Doors Overview Cabinet Doors Overview
  • Cabinet Doors and Drawer Fronts Warranty Information Cabinet Doors and Drawer Fronts Warranty Information
  • Center Panel Face Routing Center Panel Face Routing
  • Recommendations & Finishing Recommendations & Finishing
  • Measurements & Tolerances Measurements & Tolerances

GET INSPIRED